Aiphone JF Video Door Stations

There are three video door stations available for use with the Aiphone JF series JF1MD and JF2MED video intercom systems.

  1. Aiphone JFDA which is a surface mount plastic door station
  2. Aiphone JFDV which is a diecast steel vandal resistant surface mount door station
  3. Aiphone JFDVF which is a stainless steel vandal resistant flush mount door station

The JFDVF door station is supplied with a flush mount back box.

All models are weather resistant, are designed for outdoor use and are covered by a two year warranty.

30 degree angle boxes are available for the JFDV and JFDA colour video door stations. The JFWD for use with the JFDV and the KAWD for use with the JFDA door station. These angle boxes are particular useful when a door station is installed on an entrance with double doors or glass panelling on either side of the door. The angle box enables the door station to be angled towards the door giving a better view of the area in front of the door. Both boxes are constructed of plastic.

Please contact us prior to installing any cabling to ensure the correct type of wiring is being installed. Use of the incorrect cabling can affect the performance of the system.

Downloads

JF Door Stations Installation Manual

Aiphone KAWD Installation Manual

Note the JF model door stations are not compatible with the JA or JK series monitors.

Please see the accessories page to find accessories for this model.

        JFDA                       JFDV                         JFDVF

                                                      Dimensions
 Model  Height  Width  Depth
 JFDA  131mm  99mm  40mm
 JFDV  173mm  98mm  25mm
 JFDVF  209mm  135mm  See below

 

                      Flush mount door station hole cut out dimensions
 Model  Height  Width  Depth
 JFDVF  180mm  110mm  45mm

Home   Previous   Next   Contact Us