Aiphone JK Door Stations
There are four video door stations available for use with the Aiphone JK series video intercom systems. All these door stations have a very wide viewing angle of 170 degrees.
- Aiphone JKDA which is a surface mount plastic door station
- Aiphone JKDV which is a diecast steel vandal resistant surface mount door station
- Aiphone JKDVF which is a stainless steel vandal resistant flush mount door station
- Aiphone JKDVFAC which is a stainless steel vandal resistant flush mount door station with an Aiphone access control keypad built in
The JKDVF and JKDVFAC door stations are supplied with a flush mount back box.
All models are weather resistant, are designed for outdoor use and are covered by a three year warranty.
30 degree angle boxes are available for the JKDV and JKDA colour video door stations. The JFWD for use with the JKDV and the KAWD for use with the JKDA door station. These angle boxes are particular useful when a door station is installed on an entrance with double doors or glass panelling on either side of the door. The angle box enables the door station to be angled towards the door giving a better view of the area in front of the door. Both boxes are constructed of plastic.
Please contact us prior to installing any cabling to ensure the correct type of wiring is being installed. Use of the incorrect cabling can affect the performance of the system.
Downloads
JK Door Stations Installation Manual
Aiphone KAWD Installation Manual
Note the JK model door stations are not compatible with the JF or JA series monitors.
Please see the accessories page to find accessories for this model.
JKDA
JKDV JKDVF
JKDVFAC Images not to scale
Dimensions
Model
Height
Width
Depth
JKDA
129mm
97mm
35.5mm
JKDV
173mm
98mm
29.5mm
JKDVF
209mm
135mm
See Below
JKDVFAC
295mm
144mm
See below
| Flush mount door station hole cut out dimensions | |||
| Model | Height | Width | Depth |
| JKDVF | 180mm | 110mm | 45mm |
| JKDVFAC | 263mm | 114mm | 45mm |