Aiphone Keypads

Aiphone have released a range of competitively priced and well featured stand alone access control keypads.

There are four access control keypads in the range.

1. Aiphone AC10S which is a diecast steel vandal resistant surface mount keypad which is designed to match the profile of the JKDV, JFDV and MKDV video door stations.
2. Aiphone AC10F which is a flush mount diecast steel vandal resistant keypad and is supplied with a flush embedding box.
3. Aiphone AC10M which is a keypad mechanism only designed for integrating with a custom user supplied panel.
4. Aiphone GFAC which is a diecast steel vandal resistant keypad which is designed to be used with the Aiphone GT, GH and GF digital apartment entry panels and mount into the GF2F, GF3F and GT4F entry panel frames. (Note this keypad cannot powered from the audio bus and requires a separate power supply)

Feature list for Aiphone Keypads

• 2 door operation
• Up to 100 user codes (60 door one 40 door two)
• Selectable 4, 5 or 6 digit codes
• Easy to program and install.
• Wide power supply operation 12 to 24 volt AC or DC operation
• Weatherproof to IP54
• Illuminated keypad
• Relay outputs have normally closed and normally open contacts.

Downloads

AC Keypad Brochure

AC Keypad install manual

GFAC Keypad install manual

Please see the Door and Gate Locks page for our range of electric strikes for this model.

 

AC10S surface mount keypad

 

 

AC10F flush mount keypad

           

GFAC GT ,GH or GF panel mount keypad

 

 

 

 

 

 

AC10U keypad mechanism for installing in a custom panel

 

 

Dimensions
Model	Height	Width	Depth
AC10S	125mm	98mm	33mm
AC10F	132mm	117mm	See below

Flush mount keypad hole cut out dimensions
Model	Height	Width	Depth
AC10F	100mm	85mm	45mm

Home   Previous   Next   Contact Us